If you have a fire or water emergency, please call us now at (512) 990-4776

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

4 Reasons to Replace Polybutylene Plumbing As Soon As Possible

5/10/2020 (Permalink)

The plumber connects parts of the plastic water pipe using fittings, hands close-up. Polybutylene plumbing was once a popular choice, because it was easy to install and relatively inexpensive

4 Reasons to Replace Polybutylene Plumbing As Soon As Possible

Polybutylene plumbing was once a popular choice, because it was easy to install and relatively inexpensive. However, it was discovered that these pipes came with a myriad of problems. The following are a few reasons why you should replace them if they are used in your New Sweden, TX, building.

1. They Are Old
One reason is simply that they are aging. These types of pipes were installed between the 1970s and 1990s, which means that they are reaching the end of their life. You should install new plumbing before this becomes an issue.
2. They Can Contaminate Your Water
As polybutylene pipes break down over time, they can leach chemicals into the water, contributing to contamination. This can be especially troublesome if this water is used for drinking or in food preparation.
3. They Break Easily
Another reason to have these pipes replaced is that they can break more easily than other types of plumbing. The chemicals used to treat your water can have a negative effect on the material of these pipes. It can cause them to break and crack which can result in large amounts of water damage to your building or the surrounding area.
4. They Cannot Be Repaired
Because this type of plumbing is no longer approved under United States building codes, repairing them is not an option. They will eventually wear down to the point that they break and will likely cause many problems for your business. The best option is to install new plumbing as soon as possible to prevent this.
If you experience water damage in your building due to polybutylene piping, a cleanup and restoration company can help perform mitigation to keep secondary damage to a minimum. They can remove the water from your building and salvage a wide range of belongings. They can also perform any necessary repairs to return your building to its previous condition.

Other News

View Recent Posts