5 Ways for a Business To Use Less Water
Five Ways To Maximize The Efficiency Of Water Use And Save Money
Overuse and waste are the most significant water issues at commercial properties located in Cele, TX. Inefficient bathroom fixtures, irrigation and cooling systems can drive up water bills at any building.
1. Switch To Low-Flow Fixtures
Old commercial toilets use anywhere from three to seven gallons of water per flush. Consider a water upgrade to low-flow toilets that use anywhere from 1.28 to 1.6 gallons per flush or urinals that use just 0.05 gpf or are waterless.
2. Adjust the Irrigation System
From installing sensors that detect rain or measure soil moisture to scheduling sprinklers to water less often for longer periods of time, there are several ways to reduce outdoor water waste. Irrigation accounts for a significant percentage of water usage at commercial properties with landscaping.
3. Avoid Pipe Breaks and Leaks
Annual plumbing inspections can identify issues such as old or worn pipes or corrosion build-up that can lead to water issues and leaks. A hidden leak can cause water bills to spike, and usage will not decline until the problem is fixed.
4. Maximize Cooling Tower Efficiency
Evaporation is a primary source of water use in buildings with cooling towers. Building owners may want to mix gray and potable water or otherwise recycle water to lower usage.
5. Reduce Water Booster Pressure
Buildings with more than a few floors may rely on water boosters to pump water up to higher stories. Try turning down the settings to conserve energy and water while lowering pipe pressure that could lead to breaks and water damage.
These measures may prevent common water issues at a commercial building in Cele, TX. A property owner or manager may be able to make these upgrades with small initial investments that pay off over time and reduce risks of damage.